Pioneer AVIC-X940BT Owner's Manual - Page 173

Customizing preferences Chapter 31 Customizing preferences A beep sounds. ! Off: The beep sound is muted. # If you touch the key next to "VR Beep", the setting is changed. ! On (default): Voice recognition beep is enabled. ! Off: Voice recognition beep is disabled. p This function is available for AVIC-Z140BH only. 4 To finish the setting, touch [OK]. Changing the preinstalled splash screen You can change the splash screen to the other images preinstalled in the navigation system. 1 Display the "System Settings" screen. = For details, refer to Displaying the screen for system settings on page 170. 2 Touch [Splash Screen]. The "Select Splash Screen" screen appears. 3 Touch the image to use as the splash screen from the list. The image is displayed on the screen. 4 Touch [OK]. The image is set as the splash screen, and the "System Settings" screen returns. Changing to the splash screen stored in the SD memory card You can change the splash screen to other images stored in the SD memory card. Copy your chosen image to the SD memory card, and select the image to import. p Splash screen images should be used with- in the following formats; ! BMP or JPEG files ! Allowable horizontal and vertical size are 2 592 pixels x 1 944 pixels or smaller ! Allowable data size is 6 MB or smaller p Proper compatibility with allowable files is not guaranteed. p Imported original images will be stored in the built-in memory, but the ability to save these images cannot be guaranteed completely. If your original image data is deleted, insert the SD memory card again and re-import the original image. p The maximum number of images, including the images in the built-in memory, that can be imported and displayed on the list is 200. 1 Create a folder named "Pictures" on the top-most directory of the SD memory card. 2 Store the picture files in the "Pictures" folder. 3 Insert an SD memory card into the SD card slot. = For details of the operation, refer to Inserting and ejecting an SD memory card on page 18. 4 Display the "System Settings" screen. = For details, refer to Displaying the screen for system settings on page 170. 5 Touch [Splash Screen]. The "Select Splash Screen" screen appears. 6 Touch [Select from SD]. The "Select Splash Screen" screen appears. 7 Touch the image to use as the splash screen from the list. The image is displayed on the screen. 8 Touch [OK]. The image is set as the splash screen, and the "System Settings" screen returns. p Images imported from the SD memory card are added to the list on "Select Splash Screen". En 173