Pioneer AVIC-X950BH Operation Manual - Page 156
Touch [Auto EQ Measurement]. - drivers
View all Pioneer AVIC-X950BH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Chapter 27 Customizing preferences Do not press the h button to open or close the panel when you are using the microphone. 1 Stop the vehicle in a quiet place, close all the doors, windows and sun roof, and then turn the engine off. If the engine is left running, engine noise may prevent correct Auto EQ. p If driving restrictions are detected during measurement, measurement is canceled. 2 Fix the microphone for acoustical measurement (sold separately) in the center of the headrest of the driver's seat, facing forward. The Auto EQ may differ depending on where you place the microphone. If desired, place the microphone on the front passenger seat and perform Auto EQ. 7 Press the HOME button to display the "Top Menu" screen. 8 Touch . The "Edit/Settings" screen appears. 9 Touch [AV Settings]. The "AV Settings" menu appears. 10 Touch [Auto EQ Measurement]. The "Auto EQ Measurement" screen appears. 11 Plug the microphone into the mini-jack connector. Mini-jack of the RCA connector 3 Disconnect the iPhone or smartphone device. 4 Turn on the ignition switch (ACC ON). If the vehicle's air conditioner or heater is turned on, turn it off. Noise from the fan in the air conditioner or heater may prevent correct Auto EQ. 5 Switch the AV source to "Off". = For details of the operations, refer to Displaying the AV operation screen on page 71. 6 Set the video setting for the rear display to "Mirror AV". = For details of the operations, refer to Selecting the video for rear display on page 159. Microphone for acoustical measurement (sold separately) 12 Touch [Start]. A 10-second countdown starts. 13 Exit the vehicle and keep the door closed until the countdown finishes. When the countdown is over, a measurement tone (noise) is emitted from the speakers and the Auto EQ measurement begins. 14 Wait until the measurement is completed. When Auto EQ is completed, a message is displayed indicating that the measurement is completed. p If the vehicle's acoustics cannot be measured correctly, an error message will be displayed. p The measurement time varies depending on the type of vehicle. p To stop the measurement, touch [Stop]. 156 En