Pioneer DEH-6300UB Owner's Manual - Page 5
Use and care of the remote, control, Menu operations identical, for function settings/audio, - usb
UPC - 884938121163
View all Pioneer DEH-6300UB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Operating this unit Operating this unit Section 02 English Removing the front panel to protect your unit from theft 1 Press the detach button to release the front panel. 2 Push the front panel upward and pull it toward you. Selecting a source 1 Press SRC/OFF to cycle between: TUNER (tuner)-CD (built-in CD player)-USB (USB)/USB-iPod (iPod)-PANDORA (Pandora) -AUX (AUX) Adjusting the volume 1 Turn M.C. to adjust the volume. 3 Always keep the detached front panel in a protection device such as a protection case. Re-attaching the front panel 1 Slide the front panel to the left. Make sure to insert the tabs on the left side of the head unit into the slots on the front panel. CAUTION For safety reasons, park your vehicle when removing the front panel. Notes ! When this unit's blue/white lead is connected to the vehicle's auto-antenna relay control terminal, the vehicle's antenna extends when this unit's source is turned on. To retract the antenna, turn the source off. ! If plug and play is on and either an iPhone or iPod touch is connected, it may take time for your source to switch. Refer to USB PNP (plug and play) on page 11. 2 Press the right side of the front panel until it is firmly seated. If you cannot attach the front panel to the head unit successfully, make sure that you are placing the front panel onto the head unit correctly. Forcing the front panel into place may result in damage to the front panel or head unit. Turning the unit on 1 Press SRC/OFF to turn the unit on. Turning the unit off 1 Press and hold SRC/OFF until the unit turns off. Use and care of the remote control Using the remote control 1 Point the remote control in the direction of the front panel to operate. When using for the first time, pull out the film protruding from the tray. Replacing the battery 1 Slide the tray out on the back of the remote control. 2 Insert the battery with the plus (+) and minus (-) poles aligned properly. ! When disposing of used batteries, comply with governmental regulations or environmental public institutions' rules that apply in your country/area. ! "Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/ perchlorate. (Applicable to California, U.S.A.)" Important ! Do not store the remote control in high temperatures or direct sunlight. ! The remote control may not function properly in direct sunlight. ! Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal. WARNING ! Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately. ! Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like. CAUTION ! Use one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic objects. ! If the battery leaks, wipe the remote control completely clean and install a new battery. Menu operations identical for function settings/audio adjustments/initial settings/ lists Returning to the previous display Returning to the previous list/category (the folder/ category one level higher) 1 Press /DISP/SCRL. Returning to the main menu Returning to the top tier of the list/category. 1 Press and hold /DISP/SCRL. Returning to the ordinary display Canceling the initial setting menu Returning to the ordinary display from the list/category 1 Press BAND/ESC. En 5