Pioneer DEH-X7500S Owner's Manual - Page 12

Section 02 Using this unit Using this unit Pause (pause) 1 Press M.C. to pause or resume. Audiobooks (audiobook speed) 1 Press M.C. to select the desired setting. ! Faster - Playback at a speed faster than normal ! Normal - Playback at normal speed ! Slower - Playback at a speed slower than normal Sound Retriever (sound retriever) 1 Press M.C. to select the desired setting. 1-2-OFF (off) 1 is effective for low compression rates, and 2 is effective for high compression rates. Using Bluetooth wireless technology ! Only for DEH-X8500BH and DEH-X8500BS Using the Bluetooth telephone Important ! Leaving the unit on standby to connect to your phone via Bluetooth while the engine is not running can drain the battery. ! Operations may vary depending on the kind of cellular phone. ! Advanced operations that require attention such as dialing numbers on the monitor, using the phone book, etc., are prohibited while driving. Park your vehicle in a safe place when using these advanced operations. ! Be sure to park your vehicle in a safe place and apply the parking brake when performing this operation. Setting up for hands-free phoning Before you can use the hands-free phoning function you must set up the unit for use with your cellular phone. 1 Connection Use the Bluetooth telephone connection menu. Refer to Connection menu operation on this page. 2 Function settings Use the Bluetooth telephone function menu. Refer to Phone menu operation on the next page. Basic operations Making a phone call ! Refer to Phone menu operation on the next page. Answering an incoming call 1 When a call is received, press . Ending a call 1 Press . Rejecting an incoming call 1 When a call is received, press and hold . Answering a call waiting 1 When a call is received, press . Switching between callers on hold 1 Press M.C. Canceling call waiting 1 Press and hold . Adjusting the other party's listening volume 1 Turn LEVER while talking on the phone. ! When private mode is on, this function is not available. 12 En Turning private mode on or off 1 Press BAND/ while talking on the phone. Switching the information display 1 Press /DISP while talking on the phone. Notes ! If private mode is selected on the cellular phone, hands-free phoning may not be available. ! The estimated call time appears in the display (this may differ slightly from the actual call time). Using voice recognition This feature can be used on an iPod equipped with voice recognition that is connected by Bluetooth with the source set to iPod or BT Audio. % Press and hold M.C. to switch to voice recognition mode. Notes ! For details on voice recognition features, check the manual for the iPod you are using. ! Some commands may not be available on this unit. Connection menu operation Important ! Be sure to park your vehicle in a safe place and apply the parking brake when performing this operation. ! Connected devices may not work properly if more than one Bluetooth device is connected at a time (e.g. a phone and a separate audio player are connected simultaneously). 2 Turn M.C. to select the function. Once selected, the following functions can be adjusted. Device list (connecting or disconnecting a device from the device list) ! When no device is selected in the device list, this function is not available. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to connect/disconnect. ! Press and hold M.C. to swap between the Bluetooth device address and the device name. 3 Press M.C. to connect/disconnect the selected device. Once the connection is established, Connected is displayed. Delete device (deleting a device from the device list) ! When no device is selected in the device list, this function is not available. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to delete. ! Press and hold M.C. to swap between the Bluetooth device address and the device name. 3 Press M.C. to display Delete YES. 4 Press M.C. to delete the device information from the device list. ! While this function is in use, do not turn off the engine. Add device (connecting a new device) 1 Press and hold to display the connection menu. # You cannot perform this step during a call.