Pioneer DEH-X7500S Owner's Manual - Page 5

Using this unit Using this unit Section 02 English Part Operation e VOLUME Press to increase or decrease volume. f MUTE Press to mute. Press again to unmute. Press to perform manual seek tuning, fast forward, reverse g a/b/c/d and track search controls. Also used for controlling functions. h AUDIO DEH-X8500BH and DEHX8500BS Press to end a call, reject an incoming call, or reject a call waiting while on another call. DEH-X7500HD and DEHX7500S Press to select an audio function. i DISP/SCRL Press to select different displays. je Press to pause or resume playback. k FUNCTION DEH-X8500BH and DEHX8500BS Press to start talking to the caller while using the phone. DEH-X7500HD and DEHX7500S Press to select functions. l LIST/ ENTER Press to display the list depending on the source. While in the operating menu, press to control functions. Set up menu When you turn the ignition switch to ON after installation, set up menu appears on the display. You can set up the menu options below. 1 After installation of this unit, turn the ignition switch to ON. Set up appears. 2 Turn M.C. to switch to YES. # If you do not use the unit for 30 seconds, the set up menu will not be displayed. # If you prefer not to set up at this time, turn M.C. to switch to NO. If you select NO, you cannot set up in the set up menu. 3 Press M.C. to select. 4 Follow these steps to set the menu. To proceed to the next menu option, you need to confirm your selection. Language select (multi-language) 1 Turn M.C. to select the desired language. English-Français-Español 2 Press M.C. to confirm the selection. Calendar (setting the date) 1 Turn M.C. to change the year. 2 Press M.C. to select day. 3 Turn M.C. to change the day. 4 Press M.C. to select month. 5 Turn M.C. to change the month. 6 Press M.C. to confirm the selection. Clock (setting the clock) 1 Turn M.C. to adjust hour. 2 Press M.C. to select minute. 3 Turn M.C. to adjust minute. 4 Press M.C. to confirm the selection. Contrast (display contrast setting) 1 Turn M.C. to adjust the contrast level. 0 to 15 is displayed as the level is increased or decreased. 2 Press M.C. to confirm the selection. Quit appears. Removing the front panel to protect your unit from theft 1 Press the detach button to release the front panel. 2 Push the front panel upward (M) and then pull it toward (N) you. 5 To finish your settings, turn M.C. to select YES. # If you prefer to change your setting again, turn M.C. to switch to NO. 6 Press M.C. to select. Notes ! You can set up the menu options from the system menu. For details about the settings, refer to System menu on page 19. ! You can cancel set up menu by pressing SRC/OFF. 3 Always store the detached front panel in a protective case or bag. Re-attaching the front panel 1 Slide the front panel to the left. Make sure to insert the tabs on the left side of the head unit into the slots on the front panel. Basic operations Important ! Handle the front panel with care when removing or attaching it. ! Avoid subjecting the front panel to excessive shock. ! Keep the front panel out of direct sunlight and high temperatures. ! To avoid damaging the device or vehicle interior, remove any cables and devices attached to the front panel before detaching it. 2 Press the right side of the front panel until it is firmly seated. If you cannot attach the front panel to the head unit successfully, make sure that you are placing the front panel onto the head unit correctly. Forcing the front panel into place may result in damage to the front panel or head unit. Turning the unit on 1 Press SRC/OFF to turn the unit on. Turning the unit off 1 Press and hold SRC/OFF until the unit turns off. En 5