Pioneer DJM 3000 Owner's Manual - Page 20

USING THE FADER START FUNCTION If the separately sold CMX-3000, CMX-5000, CDJ-1000, CDJ-100S, CDJ-700S and CDJ-500 II players are connected to CH-1 - CH4, they can be started using the Channel fader lever or Cross fader lever, as long as the control cords have been connected. Channel fader lever CROSS FADER ASSIGN A switch CROSS FADER CURVE selector switch Cross fader lever CROSS FADER ASSIGN B switch FADER START switches Fader Start Play (To Use Fade-in Operation with a Connected CD Player) Fader start play will be possible when the unit has been connected with control cords to the CMX-3000, CMX5000, CDJ-1000, CDJ-100S, CDJ-700S, and CDJ-500 II CD players for DJs. In other words, when the DJ mixer's channel fader or cross fader volume is turned up, the CD player's pause function will be released, and the music will start automatically and instantly. In addition, because the CD player can be restored to the cue point when the fader is returned to its original position, sampler-type play is also possible. Cross Fader Start Play and Back Cue Play When "A" is at the cue point during standby, it can be started simply by moving the Cross fader lever from the right (B) side to the left (A) side. "B" will back cue (return to the cue point) at the same time. Moreover, when "B" is at the cue point during standby, it can be started simply by moving the Cross fader lever from the left (A) side to the right (B) side. ("A" will back cue at the same time.) CMX-3000 A B Control cords DJM-3000 CD players for which fader start play is possible when connected to this unit CMX-3000 CMX-5000 CDJ-1000 CDJ-100S CDJ-700S CDJ-500 II Cross fader lever Channel fader lever 20