Pioneer DJM 3000 Owner's Manual - Page 24
Effect Mix Fader Mode
UPC - 012562585734
View all Pioneer DJM 3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
USING THE EFFECT MIX FUNCTION CROSS FADER CURVE selector switch FADER START switches EFFECT MIX selector switch Fader display A Fader display B CROSS FADER ASSIGN A switch Cross fader lever CROSS FADER ASSIGN B switch Effect select/ start switches Effect Mix Fader Mode 1 Using the CROSS FADER ASSIGN switches (A and B) choose the channel (CH1-CH4) connected to the CD player you wish to use with cross fader effects. ¶ Be sure to assign different channels to the CROSS FADER ASSIGN switches A and B. 2 Set the CROSS FADER CURVE selector switch to 1 ( ). ¶ When set to 2 or 3, the sound volume will become lower depending on the setting of the Cross fader lever. 3 Set the Cross fader lever to the Effect Mix starting position. In the Effect Mix Fader mode, the way the sound is initially heard is determined by the starting position of the Cross fader lever. For operating procedures, see step 6. ¶ When the Cross fader lever is near the midway point, sound will be output from both A and B. ¶ When the Cross fader lever is on the A side, sound will be output from A. ¶ When the Cross fader lever is on the B side, sound will be output from the B side. 4 Set EFFECT MIX selector switch to FADER. ¶ Of the three Effect select/start switches (ECHO, ZIP, ROLL), the selected one will flash (default setting is ECHO), and the others will light steadily. ¶ The FADER START switch for the assigned channel will automatically turn ON and its indicator will light. If the settings of the CROSS FADER ASSIGN switches A/ B are changed after setting the EFFECT MIX selector switch to FADER, the corresponding channel's FADER START switch will automatically turn ON. 5 Use the Effect select/start switches to choose the desired effect (ECHO, ZIP, ROLL). ¶ The selected Effect select/start switch will flash and the others will light steadily. ¶ Two or more effects cannot be selected at the same time. ¶ The BEAT EFFECT's effect PARAMETER controls can be used to modify the effect time settings. 6 Operate the Cross fader Lever ¶ When the Cross fader lever is moved from side A toward side B, the selected effect is applied to A, and when the lever reaches side B, the B output sound is heard. If the lever is returned to side A from midway, the effect applied to A turns OFF and the normal sound is output. ¶ When the Cross fader lever is moved from side B toward side A, the selected effect is applied to B, and when the lever reaches side A, the A output sound is heard. If the lever is returned to side B from midway, the effect applied to B turns OFF and the normal sound is output. [Operation if Cross fader lever is midway when the Effect Mix Fader mode is turned on] ¶ When the Cross fader lever is moved from its initial midway position toward side A, the selected effect is applied to B, and the sound will progressively turn off in accordance with the selected effect. ¶ When the Cross fader lever is moved from its initial midway position toward side B, the selected effect is applied to A, and the sound will progressively turn off in accordance with the selected effect. ¶ In the Effect Mix Fader mode, the Cross fader lever cannot be used to control sound. While the CROSS FADER CURVE selector switch is enabled, BEAT EFFECTS cannot be used. 24