Pioneer DJM-800 Owner's Manual - Page 7

CONNECTIONS (CONNECTING EXTERNAL EFFECTORS, OUTPUT CONNECTORS/ABOUT MIDI CONNECTORS) CONNECTING EXTERNAL EFFECTORS, OUTPUT CONNECTORS Master output This unit is furnished with balanced output MASTER 1 (supporting XLR plugs), and unbalanced output MASTER 2 (supporting RCA plugs). Using the MASTER ATT switch, adjust the output level to match the input sensitivity of the power amplifier used. If the operating panel's STEREO/MONO switch is set to [MONO], the master output will be a monaural combination of L+R channels. Booth monitor output This is a TRS output supporting Ø6.3 mm phone plugs. The sound volume for this output is controlled by the BOOTH MONITOR level dial, independently of the master output level setting. Recording output These are output connectors for recording, supporting RCA plugs. Digital output This is a coaxial digital output connector, supporting RCA plugs. The sampling frequency can be set to 96 kHz/24-bit format or 48 kHz/24-bit format to match the connected device. ÷ Turn power off before changing this switch position. External effector Use a cable with Ø6.3 mm phone plugs to connect the DJ mixer's SEND connectors to the effector's input connectors. When using an effector with monaural inputs, connect only to the DJ mixer's L channel output. In this way, the mixed L+R audio signal will be sent to the effector. In the same way, use a cable with Ø6.3 mm phone plugs to connect the DJ mixer's RETURN connectors to the output connectors of the effector. If the effector has only monaural output, connect to the DJ mixer's L channel input only. The signal from the effector will be input to both L and R channels. When using an external effector, set the effect selector to [SND/RTN]. Power amplifier Cassette deck (RCA plug input connectors) (analog input recording device) Digital input AV amplifier (digital input recording device) RL LR Sampling frequency selector switch AC IN POWER OFF ON MASTER 2 REC L 1GND R 2HOT 3COLD SIGNAL GND PHONO LINE L PHONO LINE L SIGNAL GND PHONO CD L LINE CD L CONTROL CONTROL CONTROL CONTROL R R DIGITAL LINE MASTER ATT -3dB0dB -6dB -12dB DIGITAL LINE R DIGITAL CD R DIGITAL CD DIGITAL IN DIGITAL OUT fs (Hz) 48 k 96 k MIDI OUT R MASTER 1 L ADD CUT MIC SIGNAL R BOOTH (TRS) L R SEND L(MONO) R RETURN L(MONO) MASTER ATT switch Power amplifier (XLR plug input connectors) ABOUT MIDI CONNECTORS See P.20 regarding the functions of MIDI connectors. Power amplifier (for booth monitor) External effector 7