Pioneer DMH-WT8600NEX Owners Manual - Page 115
Adjusting the cutoff frequency value
View all Pioneer DMH-WT8600NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
English Menu Item [Rear Speaker Output] [Rear] [Subwoofer] [Mute Level] [ATT] [Mute] [Off] [Subwoofer Settings]*5 [Save Settings] Description Select the rear speaker output. NOTE This function is available when [Standard Mode] is selected as the speaker mode. If an interruption caused by an audio signal occurs while Apple CarPlay or Android Auto is being used, select mute or attenuate the volume of the AV source and iPhone/ smartphone application. The volume becomes 10 dB lower than the current volume. The volume becomes 0. The volume does not change. Select the subwoofer phase (page 115). Save to recall the following current sound settings by touching [OK]: slope, subwoofer phase, speaker level, Graphic EQ, HPF/LPF, listening position, crossover, time alignment. [Load Settings] [Initial Settings] [Sound Setting] TIP When you touch [Cancel], return to the [Audio] setting screen. Load the sound settings. NOTE [Sound Setting] is available only when you have already saved the sound settings (page 115). *1 [All] is not available when [Network Mode] is selected as the speaker mode. *2 If you change the listening position setting, the set values for all speakers will change in conjunction with this setting. *3 To use this function, the vehicle's acoustics must be measured in advance. *4 This function is available only when the listening position setting is set to [Front Left] or [Front Right]. *5 This function is not available when adjusting the High speaker in [Network Mode]. Adjusting the cutoff frequency value You can adjust the cutoff frequency value of each speaker. The following speakers can be adjusted: [Standard Mode]: Front, Rear, Subwoofer. [Network Mode]: High, Mid, Subwoofer. NOTE [Subwoofer Settings] is available only when [Subwoofer] is [On]. 1 Touch then swipe left on the screen. - 115 -