Pioneer DMH-WT8600NEX Owners Manual - Page 94
Using the functions on [Car Sources]
View all Pioneer DMH-WT8600NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
English NOTE When the serial number input is required, input the device number of this product. 3 Install the vehicle/head unit-specific firmware on your iDatalink Maestro module. 4 Connect this product to the iDatalink Maestro and install this product to the vehicle. The iDatalink function will be active. NOTES • For details on installing the firmware, refer to iDatalink Maestro website. • For details on connecting this product to iDatalink Maestro, refer to the Installation Manual. • You can also check the device number on the [Firmware Information] screen of this product (page 107). Starting procedure 1 Connect the iDatalink Maestro adaptor to this product. For details, refer to the Installation manual. 2 Touch . 3 Touch then . 4 Touch [Input/Output settings]. 5 Touch [AV Input]. 6 Confirm that [iDataLink] is selected. 7 Touch then swipe left on the screen. 8 Touch [Car Sources] or [Car Features]. The menu screen you touched appears. NOTE The iDataLink function is available only when the input signal is received by the iDatalink Maestro adaptor. Using the functions on [Car Sources] [Car Sources] is operated almost the same way as the built-in AV sources on this product is operated. For details on the operation, refer to the following relevant pages. • Operating via USB/iPhone (page 53) (page 60) • Operating via SiriusXM (page 81) • Operating via Bluetooth audio (page 31) • Operating via Hands-free phone (page 26) - 94 -