Pioneer DMH-WT8600NEX Owners Manual - Page 122
Appendix
View all Pioneer DMH-WT8600NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Appendix English Troubleshooting If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility. Common problems A black screen is displayed, and operation is not possible using the touch panel keys. → [Power OFF] mode is on. - Touch any button on this product to release the mode. Bluetooth operation does not work. → The power failed for the Bluetooth module of this product. - Turn the ignition switch to OFF and then to ON. If the error message is still displayed after performing the above action, please contact your dealer or an authorized Pioneer Service Station. Problems with the AV screen The screen is covered by a caution message and the video cannot be shown. → The parking brake lead is not connected or the parking brake is not applied. - Connect the parking brake lead correctly, and apply the parking brake. → The speed sensor detects that the vehicle is moving. - Park your vehicle in a safe place and apply the parking brake. No video output from the connected equipment. → The [AV Input] or [AUX Input] setting is incorrect. - Correct the settings. The audio or video skips. → This product is not firmly secured. - Secure this product firmly. No sounds are produced. The volume level will not rise. → Cables are not connected correctly. - Connect the cables correctly. The icon is displayed, and operation is impossible. → The operation is not compatible with the video configuration. - The operation is not possible. Random playback in Music Browse mode is released in the USB storage device. → Random playback in Music Browse mode is canceled after the ignition switch is turned off (ACC OFF). - Switch to Music Browse mode again and turn on random playback. The picture is stretched, with an incorrect aspect ratio. → The aspect setting is incorrect for the display. - Select the appropriate setting for that image. iPhone cannot be operated. → The iPhone is frozen. - Reconnect the iPhone with the USB interface cable for iPhone. - 122 -