Pioneer DMH-WT8600NEX Owners Manual - Page 124
Error messages
View all Pioneer DMH-WT8600NEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
English Problems with Application screen A black screen is displayed. → While operating an application, the application was ended on the smartphone side. - Touch to display the home menu screen. → The smartphone OS may be awaiting screen operation. - Stop the vehicle in a safe place and check the screen on the smartphone. The screen is displayed, but operation does not work at all. → An error has occurred. - Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again. - When an Android device is connected, disconnect the Bluetooth connection from this product and then reconnect it. The smartphone was not charged. → Charging stopped because the temperature of the smartphone rose due to prolonged use of the smartphone during charging. - Disconnect the smartphone from the cable, and wait until the smartphone cools down. → More battery power was consumed than was gained from charging. - This problem may be resolved by stopping any unnecessary services on the smartphone. Error messages When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center. Common AMP Error → This product fails to operate or the speaker connection is incorrect; the protective circuit is activated. - Check the speaker connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance. Product overheat. System will be shut down automatically in 1 minute. Restart the product by ACC-Off/On may fix this problem. If this message keep showing up, it is possible that some problem occured in the product. → The temperature of the main unit is too high. - Turn off the ignition switch (ACC OFF) then wait until the main unit temperature reaches low. SiriusXM® Satellite Radio Check Antenna → The antenna connection is incorrect. - Check the antenna connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance. Check Tuner → The SiriusXM Connect Vehicle Tuner connection is incorrect. - Check the tuner connection and battery voltage. If the message fails to - 124 -