Pioneer DV610E Operating Instructions - Page 39

Video Output settings 08 English Setting TV Screen (This setting effective for analog and HDMI video output. See also Screen sizes and disc formats on page 51.) Option 4:3 (Letter Box) 4:3 (Pan & Scan) 16:9 (Wide) 16:9 (Compressed) Component Out Progressive Interlace AV Connector Out Video RGB HDMI Resolution 1920x1080p 1920x1080i 1280x720p 720x480p (NTSC)/ 720x576p (PAL) 720x480i (NTSC)/ 720x576i (PAL) What it means Set if you have a conventional 4:3 TV. Widescreen movies are shown with black bars top and bottom. Set if you have a conventional 4:3 TV. Widescreen movies are shown with the sides cropped so that the image fills the screen. Set if you have a widescreen TV. Can be selected when you are connected via HDMI, and have the HDMI Resolution set to 1920x1080p, 1920x1080i or 1280x720p. Video in 4:3 can be properly displayed on a 16:9 high definition television (with black bars shown on either side of the screen). Set if your TV is compatible with progressive scan video (see your TV's instruction manual for details). The PRGSVE indicator lights in the front panel display. See also Switching the video output to interlace using the front panel controls on page 12. Note that progressive scan video is only output from the component video jacks. Set if your TV is not compatible with progressive scan video. Ordinary (composite) video output, compatible with all TVs. If your TV is compatible, this setting gives the best picture quality. Note that there is no output from the component jacks when this setting selected. Set if your TV supports 1920x1080 pixel progressive-scan video (24 Hz frame rate is not supported). Set if your TV supports 1920x1080 pixel interlace video. Set if your TV supports 1280x720 pixel progressive-scan video. Set if your TV supports 720x480 pixel (NTSC)/ 720x576 pixel (PAL) progressive-scan video. Set if your TV supports 720x480 pixel (NTSC)/ 720x576 pixel (PAL) interlace video. 39 En