Pioneer PRS-D800 Owner's Manual - Page 11
Connecting the speaker, output terminals, Connecting the units
View all Pioneer PRS-D800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connecting the units 1 System remote control terminal 2 Ground terminal 3 Power terminal 4 Terminal screws 5 Battery wire 6 Ground wire 7 System remote control wire Connecting the speaker output terminals 1 Use wire cutters or a utility knife to strip the end of the speaker wires to expose about 10 mm (3/8 in.) of wire and then twist the wire. Twist 1 Terminal screws 2 Speaker wires 3 Speaker output terminals English Section 02 2 Attach lugs to wire ends. Use pliers, etc., to crimp lugs to wires. 1 Lug (sold separately) 2 Speaker wire 3 Connect the speaker wires to the speaker output terminals. Fix the speaker wires securely with the terminal screws. En 11
1
System remote control terminal
2
Ground terminal
3
Power terminal
4
Terminal screws
5
Battery wire
6
Ground wire
7
System remote control wire
Connecting the speaker
output terminals
1
Use wire cutters or a utility knife to
strip the end of the speaker wires to ex-
pose about 10 mm (3/8 in.) of wire and
then twist the wire.
Twist
2
Attach lugs to wire ends.
Use pliers, etc., to crimp lugs to wires.
1
Lug (sold separately)
2
Speaker wire
3
Connect the speaker wires to the
speaker output terminals.
Fix the speaker wires securely with the term-
inal screws.
1
Terminal screws
2
Speaker wires
3
Speaker output terminals
En
11
English
Section
02
Connecting the units