Pioneer PRS-D800 Owner's Manual - Page 9
About suitable, specification of speaker, Connecting the speakers, and RCA input, Connecting
View all Pioneer PRS-D800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Connecting the units Section 02 English About suitable specification of speaker Ensure speakers conform to the following standards, otherwise there is a risk of fire, smoke or damage. Speaker impedance is 2 W to 8 W for stereo connection, or 4 W to 8 W for monaural and other bridge connection. Subwoofer Speaker channel Two-channel output One-channel output Power Nominal input: Min. 125 W Nominal input: Min. 300 W Other than subwoofer Speaker channel Two-channel output One-channel output Power MAX input: Min. 250 W MAX input: Min. 600 W Two-channel input (Stereo) When connecting two speakers (Left and right) 3 4 1 5 26 1 Speaker output (Right) 2 Speaker output (Left) 3 RCA input jack A (Left) 4 RCA input jack B (Right) 5 RCA cable (sold separately) 6 From car stereo (RCA output) Two-channel input (Stereo) When connecting a speaker (Bridge) Connecting the speakers and RCA input The RCA input mode can be two-channel (stereo) or one-channel (mono). The figures below show examples of connection. Connect the speaker leads and RCA input accordingly to suit the mode. 2 3 1 4 5 1 Speaker output 2 RCA input jack A 3 RCA input jack B 4 RCA cable (sold separately) 5 From car stereo (RCA output) One-channel input (Mono) When connecting two speakers (front left and rear left) ! Slide INPUT (input) switch to 1CH position. ! Audio from RCA input A will be output from the speakers. En 9