Pioneer PRS-D800 Owner's Manual - Page 5
s what, Setting the unit - 2 channel amplifier
View all Pioneer PRS-D800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Setting the unit What's what Right side 1 Front side Section 01 ! If using only one input plug, set the gain controls for speaker outputs A and B to the same position. 2 Terminal cover Remove the cover before connecting the amplifier. For details, refer to Before connecting the amplifier on page 7. 3 Power indicator The power indicator lights up to indicate power ON. 4 INPUT (input) switch Select 2CH for two-channel input and 1CH for one-channel input. English 23 2 Back side 4 To adjust the switch, use a flathead screwdriver if needed. 1 GAIN (gain) control If output remains low, even when the car stereo volume is turned up, turn controls to lower level. If distortion occurs when the car stereo volume is turned up, turn these controls to higher level. ! For use with an RCA equipped car stereo (standard output of 500 mV), set to the NORMAL position. For use with an RCA equipped Pioneer car stereo, with maximum output of 4 V or more, adjust level to match that of the car stereo output. ! If you hear too much noise when using the speaker input terminals, turn the gain control to higher level. En 5