Pioneer VSX 1017TXV Owner's Manual - Page 65
Symptom, Remedy
View all Pioneer VSX 1017TXV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Additional information 12 Display Symptom Remedy The display is dark or off. • Press DIMMER on the remote control repeatedly to select a different brightness. After making an adjustment the • Press DIMMER on the remote control repeatedly to select a different brightness. display goes off. You can't get DIGITAL to display • Check the digital connections and make sure that the digital inputs are assigned correctly (see The Input when using the SIGNAL SELECT Assign menu on page 52). button. • If the multichannel analog inputs are selected, select a different input source. The Dolby/DTS indicator doesn't • These indicators do dot light if playback is paused. light when playing Dolby/DTS • Check the playback (especially the digital output) settings of the source component. software. When playing a DVD-Audio disc, • This is not a malfunction. 96 kHz audio from DVD-Audio discs is only output from the analog outputs of the DVD player display shows the DVD player. This receiver cannot show the playback sample rate when using the analog inputs. 96 kHz. However, the receiver's display does not. During playback of a DTS 96/24 • Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 30). source, the display doesn't show 96 kHz. When playing Dolby Digital or DTS sources, the receiver's format indicators do not light. • Check that the player is connected using a digital connection. • Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 30). • Check that the player isn't set up so that Dolby Digital and DTS sources are converted to PCM. • Ensure that if there are several audio tracks on the disc, the Dolby Digital or DTS is selected. When playing certain discs, none • The disc may not contain 5.1/6.1 channel material. Check the disc packaging for more on what audio of the receiver's format tracks are recorded on the disc. indicators light. When playing a disc, the • Make sure that the receiver is set to AUTO or DIGITAL (see Choosing the input signal on page 30). 2 PL II or Neo:6 indicator lights • If a two channel soundtrack is currently playing (including Dolby Surround encoded), then this is not a on the receiver. malfunction. Check the disc packaging for details about the audio tracks available. During playback of a Surround • The source may be Dolby Surround EX / DTS-ES software, but it has no flag to indicate it is 6.1 EX or DTS-ES source on the SBch compatible. Set to SBch ON (see Using surround back channel processing on page 30) then switch to the AUTO setting, the EX and ES THX Surround EX or Standard EX listening mode (see Listening in surround sound on page 27). indicators don't light, or the signal is not properly processed. 65 En