Pioneer VSX-21TXH Owner's Manual - Page 65

KURO LINK 07 Setting the PQLS function PQLS (Precision Quartz Lock System) is a digital audio signal transfer control technology using the KURO LINK function. It offers higher-quality audio playback by controlling audio signals from the receiver to a PQLS compatible player, etc. This enables removing jitter that has a negative effect on the quality of the sound and is generated upon transmission. • VSX-23TXH only: On players compatible with PQLS Multi Surround, PQLS works for all sources. Set the player's audio output to Linear PCM. • On players compatible with PQLS 2 ch Audio, PQLS only works when playing CDs. To use the PQLS function, set PQLS in the player's Setup Navigator to AUTO. Please refer to the operating instructions supplied with your player for more information. This function is activated when KURO LINK is set to ON. THX PHASE CTRL STATUS ANT MPX PQLS MEMORY AUDIO INFO CH DISP TV CTRL RECEIVER REMOTE SETUP ZONE 2 ZONE 3 MAIN • Press RECEIVER , then press PQLS to select PQLS setting. The setting is displayed on the front panel display. • PQLS AUTO - PQLS is enabled. A precision quartz controller in this receiver eliminates distortion caused by timing errors (jitter), giving you the best possible digital-to-analog conversion when you use the HDMI interface. This is valid as an HDMI function for PQLS-compatible players. • PQLS OFF - PQLS is disabled. Before using synchronization Once you have finished all connections and settings, you must: 1 Put all components into standby mode. 2 Turn the power on for all components, with the power for the flat panel TV being turned on last. 3 Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not. 4 Check whether the components connected to all HDMI inputs are properly displayed. Synchronized amp mode The synchronized amp mode can be set from the KURO LINK-compatible TV's remote control. See the explanation below for operations in the synchronized amp mode. These functions are set from the TV's menu screen. For more information, refer to the operating instructions of the KURO LINK-compatible TV. Synchronized amp mode operations When using the synchronized amp mode, the KURO LINK-compatible component connected to the receiver operates in sync as described below. • The receiver's volume can be set and the sound can be muted using the TV's remote control. • When the TV's power is set to standby, the receiver's power is also set to standby. (Only when the input for a component connected to the receiver by HDMI connection is selected or when watching the TV.) • The receiver's input switches automatically when the KURO LINK-compatible component is played. • The receiver's input switches automatically when the TV's channel is switched. • The synchronized amp mode remains in effect even if the receiver's input is switched to a component other than one connected by HDMI. The operations below can also be used on Pioneer KURO LINK-compatible flat panel TVs. • When the receiver's volume is adjusted or the sound is muted, the volume status is displayed on the flat panel TV's screen. • When the OSD language is switched on the flat panel TV, the receiver's language setting also switches accordingly. Canceling synchronized amp mode • When the synchronized amp mode is canceled, the receiver's power turns off if you were viewing an HDMI input or a TV program on the TV. • When in the synchronized amp mode, the synchronized amp mode is canceled when the receiver's power is turned off. To turn the synchronized amp mode back on, select the synchronized amp mode using the TV's remote control. • When in the synchronized amp mode, the synchronized amp mode is canceled if an operation that produces sound from the TV is performed from the TV's menu screen, if the receiver's HDMI output setting is changed, etc. 65 En