Pioneer VSX-30 Owner's Manual - Page 65
Listening to your system, Selecting MCACC presets, Choosing the input signal
UPC - 884938109246
View all Pioneer VSX-30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Listening to your system 06 Selecting MCACC presets • Default setting: MEMORY 1 If you have calibrated your system for different listening positions1, you can switch between settings to suit the kind of source you're listening to and where you're sitting (for example, watching movies from a sofa, or playing a video game close to the TV). • While listening to a source, press RECEIVER , then press MCACC. Press repeatedly to select one of the six MCACC presets2. See Data Management on page 102 to check and manage your current settings. Choosing the input signal On this receiver, it is possible to switch the input signals for the different inputs as described below.3 • Press RECEIVER , then press SIGNAL SEL to select the input signal corresponding to the source component. Each press cycles through the options as follows: • AUTO - The receiver selects the first available signal in the following order: HDMI; DIGITAL; ANALOG. • ANALOG - Selects an analog signal. • DIGITAL - Selects an optical or coaxial digital signal. • HDMI - Selects an HDMI signal.4 • PCM - For PCM input signals.5 The receiver selects the first available signal in the following order: HDMI; DIGITAL. HDMI is not assigned by default. To select an HDMI signal, conduct the input setup procedure (see The Input Setup menu on page 44). When set to DIGITAL, HDMI or AUTO (only selected DIGITAL or HDMI), the indicators light according to the signal being decoded (see Display on page 11). Note 1 Different presets might also have separate calibration settings for the same listening position, depending on how you're using your system. These presets can be set in Automatically conducting optimum sound tuning (Auto MCACC on page 41 or Automatic MCACC (Expert) on page 91, either of which you should have already completed. 2 • These settings have no effect when headphones are connected. • You can also press / to select the MCACC preset. 3 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro digital signal formats. The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32 kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus, DTS-EXPRESS, DTS-HD Master Audio and SACD. • You may get digital noise when an LD, CD, DVD or BD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 30) and set the signal input to DIGITAL. • Some DVD players don't output DTS signals. For more details, refer to the instruction manual supplied with your DVD player. 4 When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not from this receiver. 5 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance. • When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input signal if this is a problem. 65 En