Pioneer VSX-D811S Owner's Manual - Page 28
Controls and Displays
View all Pioneer VSX-D811S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
04 Controls and Displays 2 DIGITAL Lights when a Dolby Digital signal is detected. ANALOG Lights when an analog signal is detected. DTS Lights when a source with DTS audio signals is detected. 2 DTS When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal. 3 2 DIGITAL When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal. 4 2 PRO LOGIC II When the Standard mode of the receiver is on, this lights to indicate Pro Logic II decoding. 5 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 6 DIRECT Lights when source direct playback is in use. This function bypasses all tone, balance, Advanced surround, and Dolby Surround effects. 7 MIDNIGHT Lights during Midnight listening. 8 MONITOR Lights when MONITOR is selected (page 48). 9 Speaker indicator Shows the speaker system currently in use. 10 Character display 11 Neo:6 (VSX-D811S) Lights during NEO:6 processing 12 ADV. SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected. 13 LOUDNESS Lights when LOUDNESS has been selected. 14 TUNER indicators STEREO: Lights when a stereo FM broadcast is being received in auto stereo mode. MONO: Lights when the mono mode is set using the MPX button. TUNED: Lights when a broadcast is being received. 15 Master volume level Shows the overall volume level. ---dB indicates the minimum level, and −0 dB indicates the maximum level. Depending on your level settings for each channel, the maximum level can range between -10 dB and -0 dB. 28 En XRB3013A.26.31 28 01.12.12, 4:43 PM