Pioneer VSX-D811S Owner's Manual - Page 39

Setting up the receiver 06 Dynamic range control setting (page 42) Compress the dynamic range of the sound track. Dual mono setting (page 42) Isolate one channel when listening to discs with dual mono encoding. Component video input setting (page 42) Specify the components to be assigned to the component video inputs (below). • Component video 1 input setting • Component video 2 input setting Surround back channel input setting (VSX-D811S only) (page 43) Specify the number of surround back inputs you have connected. Digital input settings (page 43) Specify the components to be assigned to the video and digital inputs (below). • Coaxial digital input 1 setting • Coaxial digital input 2 setting • Optical digital input 1 setting • Optical digital input 2 setting (VSX-D811S only) 4 Use ' or ' to adjust the setting. The setting is entered automatically. 5 Repeat steps 3 and 4 to set other surround modes. 6 When you're done, press ENTER to exit. Speaker setting • Default setting: S (all speakers) You must let the receiver know how many speakers you have, and how big they are. The size you choose (large or small) determines how much bass is sent from the receiver to the speakers. In the display, F, C, and S refer to front, center, and surround speakers respectively. Speaker size is denoted as L for large speakers, S for small speakers, and (asterisk) if no speaker is connected. • If the cone size (diameter) of the speaker is larger than 5 inches, set the speaker size to L. • If you're not using a subwoofer, we recommend setting the front speakers to L. • Cycle through the available choices using ' or ' and choose a configuration that matches your speaker setup. One of the following configurations should match your setup: FS-CS-SS FL-C -SS FS-CS-S FL-C -SL FS-C -SS FL-CS-S FL-CL-SL The setting display is automatically exited after 20 seconds of inactivity. FL-CS-SS FL-CS-SL FL-CL-SS FL-CL-S XRB3013A.38.44 39 39 En 01.12.12, 4:46 PM