Pioneer VSX-D811S Owner's Manual - Page 51

Controlling the rest of your system, Erasing one of the remote, control button settings, Clearing - av receiver

Get Pioneer VSX-D811S PDF manuals and user guides View all Pioneer VSX-D811S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

Controlling the rest of your system 09 4 Point the two remote controls towards each other about 1-2 inches apart then press the button that will be doing the learning on this receiver's remote control (for example 3, 7, etc.). The LED flashes rapidly. 1 - 2 inches 5 Press the corresponding button on the other remote control that is sending (teaching) the signal to this receiver's remote control (for example 3, 7, etc.). If the operation has been learned successfully, the LED on this receiver's remote will go out and then light steadily. If for some reason the operation hasn't been learned the LED will blink for three seconds and then light steadily. If this happens, keep pressing the (teaching) button as you vary the distance between the two remotes, until you see the the LED light steadily. To program additional operations for the current component repeat steps 4 and 5. To program operations for another component exit and repeat steps 1 through 5. 6 Press and hold the REMOTE SETUP button for three seconds to store the operation(s). • Some commands from other remote controls cannot be learned, but in most cases the remotes just need to be moved closer together or farther apart. • Certain buttons represent operations that cannot be learned from other remote controls. These include: RECEIVER , REMOTE SETUP and the MULTI CONTROL, RECEIVER CONTROL and MASTER VOLUME buttons. SOURCE RECEIVER DVD TV VCR CD-R MULTI CONTROL RCV CD TUN TVC 1 2 3 MIDNIGHT 5.1 / 7.1 ATT 4 5 6 EFFECT 7 8 9 10 DISC 0 ENTER DTV INFO ¶ BAND 1 MPX/RETURN D.ACCESS 7 3 GUIDE 8 DTV MENU ¢ CLASS ¡ DTV ON/OFF 4 2 /DTS DSP TEST TONE SIGNAL SELECT CH SELECT CH LEVEL FUNCTION LOUDNESS FL DIMMER SETUP MUTING TUNE ST ST ENTER TUNE VOLUME CHANNEL MENU MASTER VOLUME TVFUNC TV TV CONTROL AV PRE-PROGRAMMED AND LEARNING REMOTE CONTROL UNIT • TV CONTROL buttons (TV , TV VOL +/-, and TV INPUT) can only be learned after selecting TV or TVC. Erasing one of the remote control button settings (VSX-D811S only) This erases one of the buttons you have programmed and restores the button to the factory default. 1 Press REMOTE SETUP and hold for three seconds. The LED lights steadily for two seconds. 2 Press the MULTI CONTROL button relating to the button setting to be erased. 3 Prepare the remote to erase the button setting. Press the RECEIVER button twice quickly. The LED blinks to indicate the remote is ready to erase the button setting. 4 Press and hold the button to be erased for three seconds. The LED lights steadily for three seconds and then goes off. 5 Repeat step 4 to erase other buttons. 6 Press and hold the REMOTE SETUP button for two seconds to exit. Clearing all the remote control settings You can clear all presets and restore the factory default settings. 1 Press REMOTE SETUP and hold for three seconds. The LED lights steadily for two seconds. XRB3013A.49.67 51 51 En 01.12.12, 4:49 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Controlling the rest of your system
09
51
En
4
Point the two remote controls towards
each other about 1-2 inches apart then
press the button that will be doing the
learning on this receiver
’
s remote control
(for example
3
,
7
, etc.).
The LED flashes rapidly.
1 - 2 inches
1
¡
4
¢
7
8
3
1
2
3
4
5
6
7
8
9
0
5
Press the corresponding button on the
other remote control that is sending
(teaching) the signal to this receiver
’
s
remote control (for example
3
,
7
, etc.).
If the operation has been learned successfully,
the LED on this receiver
’
s remote will go out
and then light steadily.
If for some reason the operation hasn
’
t been
learned the LED will blink for three seconds and
then light steadily. If this happens, keep
pressing the (teaching) button as you vary the
distance between the two remotes, until you
see the the LED light steadily.
To program additional operations for the current
component repeat steps 4 and 5.
To program operations for another component
exit and repeat steps 1 through 5.
6
Press and hold the REMOTE SETUP
button for three seconds to store the
operation(s).
•
Some commands from other remote
controls cannot be learned, but in most
cases the remotes just need to be moved
closer together or farther apart.
•
Certain buttons represent operations that
cannot be learned from other remote
controls. These include:
RECEIVER
,
REMOTE SETUP
and the
MULTI
CONTROL
,
RECEIVER CONTROL
and
MASTER VOLUME
buttons.
•
TV CONTROL
buttons (
TV
,
TV VOL +/-
,
and
TV INPUT
) can only be learned after
selecting
TV
or
TVC
.
Erasing one of the remote
control button settings
(VSX-D811S only)
This erases one of the buttons you have
programmed and restores the button to the
factory default.
1
Press REMOTE SETUP and hold for three
seconds.
The LED lights steadily for two seconds.
2
Press the MULTI CONTROL button
relating to the button setting to be erased.
3
Prepare the remote to erase the button
setting.
Press the
RECEIVER
button twice quickly.
The LED blinks to indicate the remote is ready
to erase the button setting.
4
Press and hold the button to be erased
for three seconds.
The LED lights steadily for three seconds and
then goes off.
5
Repeat step 4 to erase other buttons.
6
Press and hold the REMOTE SETUP
button for two seconds to exit.
Clearing all the remote
control settings
You can clear all presets and restore the factory
default settings.
1
Press REMOTE SETUP and hold for three
seconds.
The LED lights steadily for two seconds.
XRB3013A.49.67
01.12.12, 4:49 PM
51