Pioneer VSX-D811S Owner's Manual - Page 38
Setting up the receiver, Choosing your receiver setup
View all Pioneer VSX-D811S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
06 Setting up the receiver Choosing your receiver setup To ensure the best possible surround sound, be sure to complete the following set up operations. This is particularly important when using Dolby surround. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers, etc.). Refer to the following pages for details on each of the settings. If you are using the Pioneer S-FCRW220 speaker system, you'll have to set the Crossover frequency to 200kHz. You can leave the Speaker setting and the Subwoofer setting in the default settings. SOURCE RECEIVER DVD RCV TV VCR MULTI CONTROL CD TUN CD-R TVC 1 2 3 TEST TONE 4 INPUT ATT 5 FL DIMMER 6 CH SELECT 7 LEVEL 8 9 +10 EFFECT DISPLAY DISC 0 ENTER DTV INFO ¶ BAND 1 MPX/RETURN D.ACCESS T.EDIT/GUIDE 7 38 CLASS ¡ DTV ON/OFF DTV MENU 4¢ TOP MENU AUDIO SUB TITLE ANGLE REMOTE SETUP STANDARD ADV.SURR. STEREO INPUT SEL. SIGNAL SEL MIDNIGHT/ LOUDNESS MUTE RECEIVER CONTROL TUNE ST SET P U ST ENTER TUNE CHANNEL 1 Press RECEIVER to turn the power on. The STANDBY indicator goes out. 2 Press RCV. 38 En XRB3013A.38.44 38 3 Use } or ] to choose the option you want to adjust. It will be easiest to adjust each of the settings in turn, following the order below (and on the following pages). The current setting is shown for each option as you cycle through the display. Speaker setting (page 39) Specify the number and type of speakers you have connected. Surround back speaker setting (VSXD811S only) (page 40) Specify your surround back speaker/ surround back subwoofer setup. 6.1 channel setting (VSX-D811S only) (page 40) Set when 6.1 channel decoding is used. Subwoofer setting (page 40) Specify how the subwoofer is used. Crossover frequency setting (page 40) Determine which frequencies will be sent to the subwoofer (or large speakers). LFE attenuator setting (page 41) Specify the peak level for the LFE channel. Front speaker distance setting (page 41) Specify the distance from your listening position to your front speakers. Center speaker distance setting (page 41) Specifies the distance from your listening position to your center speaker. Surround speaker distance setting (page 41) Specify the distance from your listening position to your surround speakers. Surround back speaker distance setting (VSX-D811S only) (page 42) Specifies the distance from your listening position to your surround back speakers. 01.12.12, 4:46 PM