Pioneer XW-NAV1K-K Operating Instructions - Page 20

06 USB playback Chapter 6: USB playback 2. Pull the USB terminal cover. Playing files stored on USB devices • This unit may not recognize the USB device, may not play files or may not supply power to the USB device. For details, see When a USB device is connected on page 36. • Pioneer does not support that all files recorded on all USB devices will play or that power will be supplied to the USB device. Also note that Pioneer will accept no responsibility whatsoever for loss of files on USB devices caused by connection to this unit. 1 Press  STANDBY/ON to turn the power on. The selected input is displayed on the front panel display. 2 ' Press FUNCTION to select the USB input. ' is displayed on the front panel display. WARNING Store the USB terminal cover out of the reach of children and infants. If accidentally swallowed, contact a doctor immediately. 4 Use to select the file, then press ENTER. Playback starts. • If you press  PLAY, this unit will play automatically files stored in a USB storage device. • Turn the power off before removing the USB storage device. 3 Connecting USB devices. The Disc Navigator appears automatically. When a USB storage device is connected to the USB terminal, remove the USB terminal cover. Recording audio CD tracks on USB devices • The tracks of audio CDs loaded in this unit can be recorded on a USB device connected to the USB terminal. This unit can not record the other input's sound. • It may not be possible to record tracks of audio CDs on a USB device. For details, see When a USB device is connected on page 36. 1. Push the USB terminal cover as shown on the diagram below. 20 En