Pioneer XW-NAV1K-K Operating Instructions - Page 40

13 Additional information Setting the TV system • This setting is available for a disc or USB storage device content. For iPod/iPhone's TV out setting, operate your iPod/iPhone. • If the picture of the disc being played is distorted, switch the TV system to the one used in your country or region. • When the TV system is switched, the types of discs that can be played are limited. • The factory default setting is AUTO. 1 Press  STANDBY/ON to turn the unit's power off. 2 Press  STANDBY/ON while pressing VOLUME +. Use the buttons on the unit's top panel. The power turns on and the TV system switches as shown below. • AUTO  NTSC • NTSC  PAL • PAL  AUTO Playing setting Types of Format discs/files NTSC PAL AUTO NTSC PAL NTSC NTSC PAL PAL NTSC PAL Cautions on use When moving this unit When moving this unit, check first that there is no disc loaded and disconnect the iPod/ iPhone. Then press  STANDBY/ON on this unit (or  STANDBY/ON on the remote control), wait for the OFF indicator on the front panel display to turn off, then unplug the power cord. Damage may occur if the unit is transported or moved with a disc inserted, or when another device is connected to the iPod/ iPhone connector port, USB terminal, or AUX IN mini-plug jack. Place of installation • Choose a stable place near the TV or stereo system being used with this unit. • Do not place this unit on top of a TV or color monitor. Also install it away from cassette decks and other devices easily affected by magnetic forces. Avoid the following types of places: • Places exposed to direct sunlight • Humid or poorly ventilated places • Extremely hot places • Places exposed to vibrations • Places in which there is much dust or cigarette smoke • Places exposed to soot, steam or heat (kitchens, etc.) - NTSC PAL NTSC or PAL no disc Do not place objects on this unit. Do not place any objects on top of this unit. Do not obstruct the ventilation holes. Do not use this unit on shaggy rugs, beds, sofas, etc., or wrapped in cloth, etc. Doing so will prevent the heat from dispersing, leading to damage. 40 En