Pioneer XW-NAV1K-K Operating Instructions - Page 37

Additional information 13 Problem Check Remedy The order of the folder and file names displayed on the Disc Navigator depends on the order in which the folders or files were recorded on the USB device. English Folder or file names are not This is not a problem with this unit. displayed in alphabetical order. Much time is required to recognized the USB device. Power is not supplied to the USB device. What is the USB devices capacity? Some time may be required to load the data when large capacity USB devices are connected (this could take several minutes). Is Err displayed on the front panel Turn the power off then back on. display? No power is supplied if Turn the power off, then disconnect and reconnect the USB the power consumption is too device. high. Press FUNCTION to switch to the other mode, then switch again to the USB mode. (When the input is switched back to USB, ' ' is displayed on the front panel display.) If the USB device is equipped with an AC adapter, use the USB device with the AC adapter connected. Français Español Audio CD tracks cannot be Is there enough free space on the Recording is not possible if there is not enough free space left recorded on a USB device. USB device? on the USB device. In this case, Available USB space is low is displayed. Are there 300 or more folders on the USB device? Are there already 99 PIONEER folders on the USB device? Recording is not possible if the USB device contains 300 or more folders. Recording is not possible if there are already 99 PIONEER folders on the USB device. When connected to an HDMI-compatible device Problem Picture is not displayed. Check Is the resolution properly set? Remedy Set HDMI Resolution properly for the connected device (page 26). Restore HDMI Resolution to the default setting (720x480p/ 720x576p) (page 27). Is the HDMI cable properly connected? Sound is not produced or is distorted. Is HDMI Out properly set? Connect the cable securely (all the way in). With some cables, 1080p video signals will not be output. Set HDMI Out to LPCM (2CH) or Auto (page 26). Set HDMI Out to Auto (page 26). Change the HDMI Color setting (page 26). Multichannel audio signals Is HDMI Out properly set? are not output. Colors are not properly displayed on TV screen. Is HDMI Color properly set? 37 En