ProForm 105 Cse Instruction Manual - Page 6

ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left and right parts are marked "L" or "Left" and "R" or "Right." • To identify small parts, see page 17 • As you assemble the exercice bike, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. • In addition to the included tool(s), assembly requires the following tools: • one adjustable wrench • one Phillips screwdriver • Note: If a part is not in the hardware kit, check to see if it has been preassembled. Go to www.iconservice.ca/CustomerService/ registration and register your product. • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have internet access, call Customer Service (see the front cover of this manual) and register your product. STEP 1 Fix the Front bottom tube (2) and the Rear bottom tube (3) onto the Main frame (1) with the Allen pan head screw (7) and Curved washer (9) as shown. 6