ProForm 105 Cse Instruction Manual - Page 9

STEP 4 Pull the Pulse wire (23) out of the console bracket hole of the Handlebar post (17), and then fasten the handlebar (16) onto the Handlebar post (17) with the Allen pan head screw (13) and the spring washer (8) and Curved washer (9). STEP 5 I.Fasten the Handlebar(27R/L) with the Bolt(29),the Curved washer(30) and the Cap nut(25) onto the Swing tube(28L/R). II. Connect the Pulse wire (23) and the Connection wire (15) with the wires of console (19) respectively, and then fasten the console (19) onto the console bracket of the Handlebar post (17) with the Cross pan head screw (21). II. Insert one side of adapter into the back of console (19), and another plug insert to power supply. Note: Before using the machine, make sure all the screws are fasten tightly Now your machine is ready for use. 9