ProForm 1200 E Elliptical English Manual - Page 6
Connect the Upper Wire 77 to the Lower Wire
View all ProForm 1200 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin. Attach the Stabilizer (8) to the Frame (1) with two M10 x 123mm Button Bolts (38) and two M10 Locknuts (70) (one is not shown). 38 8 Tighten two Leveling Feet (36) into the under- side of the Stabilizer (8). 36 36 1 70 2. Have a second person hold the Upright (2) near the Frame (1). Connect the Upper Wire (77) to the Lower Wire (78). Tip: Avoid pinching the wires. Insert the Upright (2) into the Frame (1). Attach the Upright (2) with four M10 x 25mm Patch Screws (48) and four M10 Split Washers (85). 2 Avoid pinching the wires 2 77 78 85 48 85 48 85 1 6
6
1.
Attach the Stabilizer (8) to the Frame (1) with
two M10 x 123mm Button Bolts (38) and two
M10 Locknuts (70) (one is not shown).
Tighten two Leveling Feet (36) into the under-
side of the Stabilizer (8).
2.
Have a second person hold the Upright (2) near
the Frame (1).
Connect the Upper Wire (77) to the Lower Wire
(78).
Tip: Avoid pinching the wires.
Insert the
Upright (2) into the Frame (1).
Attach the Upright (2) with four M10 x 25mm
Patch Screws (48) and four M10 Split Washers
(85).
1
1
2
48
85
78
2
1
70
38
8
36
36
77
85
48
85
Avoid pinching
the wires
To make assembly easier, read the
information on page 5 before you begin.