ProForm 1200 E Elliptical English Manual - Page 8

5. Apply a small amount of the included grease to two Thrust Washers (66). 5 Attach the Left Track Arm (12) to the left Crank Arm (83) with an M8 x 19mm Button Screw (56), an M8 Small Washer (18), an Axle Cap (41), and a Thrust Washer (66). Make sure that the Thrust Washer remains on the shoulder of the Axle Cap, and that the Wave Washer (88) remains on the end of the left Crank Arm. 88 Repeat this step to attach the Right Track 66 Arm (11). 41 11 18 56 83 Grease 12 6. Identify the Left Pedal Arm (14), which is marked with a "Left" sticker. 6 Attach a Pedal (21) to the Left Pedal Arm (14) with three M10 x 13mm Button Screws (54) and three M10 Washers (67). Make sure that the Button Screws are in the indicated holes. The other holes in the Left Pedal Arm are not used. Attach the other Pedal (not shown) to the Right Pedal Arm (not shown) in the same way. 21 14 67 54 8