ProForm 1200 E Elliptical English Manual - Page 9

7. Apply a small amount of grease to the barrel of an M10 x 65mm Bolt Set (94). 7 Attach the Left Pedal Arm (14) to the bracket on the Left Track Arm (12) with the M10 x 65mm Bolt Set (94). 94 14 Attach the Right Pedal Arm (not shown) to the Right Track Arm (not shown) in the same way. Grease 94 12 8. Identify the Left Handlebar (19), which is marked with an "L." 8 Insert the Left Handlebar (19) into one of the Handlebar Legs (17). Turn the Left Handlebar and the Handlebar Leg so that the wide side of the pivot tube on the Left Handlebar is above the hexagonal holes in the Handlebar Leg. Attach the Left Handlebar (19) with two M8 x 38mm Button Bolts (58) and two M8 Locknuts (72). Make sure that the Locknuts are inside the hexagonal holes. Do not tighten the Button Bolts yet. 19 20 Wide side of pivot tube Assemble the Right Handlebar (20) and the other Handlebar Leg (17) in the same way. 58 72 58 Hexagonal Holes 17 17 9