ProForm 210 Csx Instruction Manual - Page 6

ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you finish all assembly steps. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 5. In addition to the included tool(s), assembly requires the following tools: one Phillips screwdriver one adjustable wrench Assembly may be easier if you have a set of wrenches. To avoid damaging parts, do not use power tools. 1. Go to www.iconsupport.eu on your computer and register your product. 1 • activates your warranty • saves you time if you ever need to contact Customer Service • allows us to notify you of upgrades and offers Note: If you do not have internet access, call Customer Service (see the front cover of this manual) and register your product. 2. If there are shipping brackets (not shown) on the rear of the Frame (1), remove the screws from 2 the shipping brackets and discard the screws and the shipping brackets. Identify the Rear Stabilizer (3), which has a Leveling Foot (28) near each end. Set a sturdy piece of packing material (not shown) under the rear of the Frame (1). Orient the Rear Stabilizer (3) as indicated by the sticker. Attach the Rear Stabilizer to the Frame (1) with two M10 x 68mm Screws (44). Then, remove the packing material. 3 28 1 44 28 6