ProForm Power 995 I Treadmill English Manual - Page 10
Make sure that the power cord is unplugged., See the inset drawing., Make sure not to pinch the,
View all ProForm Power 995 I Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
2. Make sure that the power cord is unplugged. Press a Base Cap (74) into each side of the Base (94). 2 Wire 81 A Tie Identify the Right Upright (90). Have a second person hold the Right Upright near the Base (94). See the inset drawing. Tie the wire tie in the Right Upright (90) securely around the end of the Upright Wire (81). Then, insert the Upright Wire into the lower end of the Right Upright as you pull the other end of the wire tie out of the Right Upright. Then, remove and discard the indicated screw (A). 81 90 74 Wire Tie 74 90 3. Lay the Right Upright (90) near the Base (94). Press the Grommet (77) into the square hole in 3 the Right Upright. Make sure not to pinch the ground wire. Then, attach the ground wire to the Right Upright (90) with a #8 x 1/2" Silver Screw (10) as shown. 94 94 10 90 77 Ground Wire Square Hole 10