ProForm Power 995 I Treadmill English Manual - Page 26

The WiFi–-Normal option will allow you to set up a wireless network connection using the console. See step 4 for instructions. The WiFi–-WPS option will allow you to set up a wireless network connection using your WPS router. See step 5 for instructions. The WiFi–-Advanced option will allow you to set up a wireless network connection using your computer, smart phone, tablet, or other Wi-Fi device. See step 6 for instructions. Connect to iFit Account—-To set up a different iFit account, but maintain the existing wireless connection, follow the instructions in the matrix. Note: This option will rarely be used. Clear WiFi Setting—-To erase the console’'s wireless network settings and have it forget the currently selected wireless network, follow the instructions in the matrix. A list of networks will appear in the matrix. Press the up and down buttons to highlight the desired network. Then, press the Enter button. Note: Do not select IFIT_SETUP. Note: The time display will show the number of the currently-selected access point. The distance display will show the total number of access points detected. If the network has a password, enter the password. A keyboard will appear in the matrix. As necessary, press the buttons on the WiFi setup card to select the caps option, the number option, or the symbol option. Press the up, down, left, and right buttons to highlight the desired letter or number. Then, press the Enter button to select the letter, number, or symbol. When you have finished entering the password, press the Done button. Contrast—-To adjust the contrast level of the display, press the Incline increase and decrease buttons. A numerical code and a web address will appear in the matrix. Go to the web address on your internetcompatible device. 4. Use WiFi–-Normal to set up a wireless connection. This option will allow you to set up a wireless network connection using the console. Note: You will need to know your network name (SSID). If your network has a password, you will also need to know the password. Log in to your iFit account on the web page. Then, enter the numerical code into the indicated field. Follow any other instructions on the web page. When the console is connected to a wireless network, the wireless symbol in the display will stop flashing and become solid. The wireless symbol will show the strength of your wireless signal; four arcs indicate full signal strength. To set up a wireless network connection using the console, first press the Enter button. Next, set the included WiFi setup card on the console. The buttons on the WiFi setup card are referenced in the following instructions. Card If you cannot complete any part of this process, or if you have any questions, go to support.ifit.com for assistance. 5. Use WiFi–-WPS to set up a wireless connection. This option will allow you to set up a wireless network connection using your WPS router. To set up a wireless network connection using your WPS router, first press the Enter button and follow the instructions in the matrix. A numerical code and a web address will appear in the matrix. Go to the web address on your internetcompatible device. 26