ProForm Power 995 I Treadmill English Manual - Page 25

HOW TO USE THE SOUND SYSTEM To play music or audio books through the console sound system while you exercise, plug a 3.5 mm male to 3.5 mm male audio cable (not included) into the jack on the console and into a jack on your MP3 player, CD player, or other personal audio player; make sure that the audio cable is fully plugged in. Note: To purchase an audio cable, see your local electronics store. Next, press the play button on your personal audio player. Adjust the volume level using the volume increase and decrease buttons on the console or the volume control on your personal audio player. If you are using a personal CD player and the CD skips, set the CD player on the oor or another at surface instead of on the console. The lower section of the display will show instructions for the selected optional screen. Make sure to follow the instructions shown in the lower part of the display. 3. Change settings as desired. Demo—-The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, the word ON will appear in the matrix. To turn on or turn off the demo mode, press the Enter button. Units—-The selected unit of measurement will appear in the matrix. To change the unit of measurement, press the Enter button. To view distance in miles, select ENGLISH. To view distance in kilometers, select METRIC. HOW TO CHANGE CONSOLE SETTINGS The console features a settings mode that allows you to view usage information, to personalize console settings, and to set up and manage a wireless network connection. 1. Select the settings mode. Default Menu—-The default menu will appear when you insert the key into the console or when you press the Home button. Press the Enter button repeatedly to select the manual main screen or the iFit screen as the default menu. Firmware Update—-For the best results, regularly check for firmware updates. To select the settings mode, hold down the Stop button while inserting the key into the console and then release the Stop button. The settings mode will then appear in the display. The time display will show the total number of hours that the treadmill has been used. The distance display will show the total number of miles (or kilometers) that the walking belt has moved. Note: The matrix will display NOT CONNECTED if the console is not connected to a wireless network. Press the Enter button to check for firmware updates using your wireless network. If an update is available, the update will begin automatically. IMPORTANT: To avoid damaging the treadmill, do not turn off the power while the firmware is being updated. The update may take several minutes. 2. Navigate the settings mode menu. While the settings mode is selected, the matrix will display several optional screens. Press the decrease button next to the Enter button to select each of the optional screens. Note: Occasionally, a firmware update may cause your console to function slightly differently. These updates are always designed to improve your exercise experience. Default Settings—-To restore the console to its factory default settings, press the Enter button. Note: The console will erase any information that you have saved in its memory. 25