ProForm Xp Whirlwind 280 Bike Canadian English Manual - Page 14

MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise bike regularly. To clean the exercise bike, use a damp cloth and a small amount of mild detergent; never use abrasives or solvents to clean the exercise bike. To avoid damaging the console, keep liquid away from the console. If the Belt (22) needs to be adjusted, first loosen the right Guard Fastener (not shown). To tighten the Belt, turn the M6 Nuts (53) clockwise; to loosen the Belt, turn the M6 Nuts counterclockwise. CONSOLE TROUBLESHOOTING If the console does not function properly, replace all the batteries at the same time. See assembly step 7 22 on page 8 for battery installation instructions. 53 ADJUSTING THE BELT The exercise bike features a precision belt that must be kept properly adjusted. If the belt is too tight, the bearings may be damaged; if the belt is too loose, the fan may be damaged. If the belt causes excessive noise or slips as you pedal, follow the steps below. Carefully remove the four Guard Clips (76), the left Guard Fastener (35), and the Left Guard (13). See the inset drawing. Press downward on the Belt (22). There should be no more than 3/4 in. (2 cm), and no less than 1/4 in. (0.6 cm), of vertical movement in the center of the Belt. 76 See the drawing at the left. Make sure that the Fan (5) is straight, and then reattach the Left Guard (13), tighten the Guard Fasteners (35), and reattach the Guard Clips (76). 76 35 13 76 22 5 14