ProForm Xp Whirlwind 280 Bike Canadian English Manual - Page 15
Adjusting The Reed Switch
View all ProForm Xp Whirlwind 280 Bike manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ADJUSTING THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. Next, locate the Reed Switch (31). Turn the Crank Arm (26) until the Magnet (48) is aligned with the Reed Switch. To adjust the reed switch, the Right Shield (18) must be moved. Remove the four M4 x 25mm Screws (69) from the Right Shield. Lift the Right Link Arm (16) off the pedal or the lock rod and move it clear of the Right Shield. Then, pull the top of the Right Shield away from the Left Shield (17). 18 17 69 69 16 69 Lock Rod 31 48 32 27 26 Loosen, but do not remove, the M4 x 12.7mm Flange Screw (27). Then, slide the Reed Switch (31) slightly closer to or away from the Magnet (48) and retighten the Screw. Turn the Crank Arm (26) for a moment. Repeat these actions until the console displays correct feedback. When the reed switch is correctly adjusted, reattach the right shield. 15