Pyle PDMT08 PDMT08 Manual 1 - Page 10

Battery Installation, Operating Instructions

Get Pyle PDMT08 PDF manuals and user guides View all Pyle PDMT08 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

BATTERY INSTALLATION WARNING: To avoid electric shock, disconnect the test leads from any source of voltage before removing the battery door. 1. Disconnect the test leads from the meter. 2. Open the battery door by loosening the screw using a Phillips head screwdriver. 3. Insert the battery into battery holder, observing the correct polarity. 4. Put the battery door back in place. Secure with the screw. WARNING: To avoid electric shock, do not operate the meter until the battery door is in place and fastened securely. NOTE: If your meter does not work properly, check the fuses and batteries to make sure that they are still good and that they are properly inserted. OPERATING INSTRUCTIONS WARNING: Risk of electrocution. High-voltage circuits, both AC and DC, are very dangerous and should be measured with great care. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
10
BATTERY INSTALLATION
WARNING
: To avoid electric shock, disconnect the test leads
from any source of voltage before removing the battery door.
1.
Disconnect the test leads from the meter.
2.
Open the battery door by loosening the screw using a Phillips
head screwdriver.
3.
Insert the battery into battery holder, observing the correct
polarity.
4.
Put the battery door back in place. Secure with the screw.
WARNING:
To avoid electric shock, do not operate the meter
until the battery door is in place and fastened securely.
NOTE
: If your meter does not work properly, check the fuses and
batteries to make sure that they are still good and that they are
properly inserted.
OPERATING INSTRUCTIONS
WARNING
: Risk of electrocution. High-voltage circuits, both AC and
DC, are very dangerous and should be measured with great care.