Pyle PDMT08 PDMT08 Manual 1 - Page 16

If the resistance is less than approximately 30, audible signal will sound. If the circuit is open,

Get Pyle PDMT08 PDF manuals and user guides View all Pyle PDMT08 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

CONTINUITY CHECK WARNING: To avoid electric shock, never measure continuity on circuits or wires that have voltage on them. 1. Set the function switch to the position. 2. Insert the black lead banana plug into the negative (COM) jack Insert the red test lead banana plug into the positive () jack. 3. Touch the test probe tips to the circuit or wire you wish to check. 4. If the resistance is less than approximately 30, the audible signal will sound. If the circuit is open, the display will indicate "1". DIODE TEST 1. Insert the black test lead banana plug into the negative COM jack and the red test lead banana plug into the positive diode jack. 2. Turn the rotary switch to the / •))) position 3. Touch the test probes to the diode under test. Forward voltage will indicate 400 to 700mV. Reverse voltage will indicate "I". Shorted devices will indicate near 0mV. Shorted devices will indicate near 0mV and an open device will 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
16
CONTINUITY CHECK
WARNING:
To avoid electric shock, never measure continuity
on circuits or wires that have voltage on them.
1.
Set the function switch to the
position.
2.
Insert the black lead banana plug into the negative (COM) jack
Insert the red test lead banana plug into the positive
(
)
jack.
3.
Touch the test probe tips to the circuit or wire you wish to check.
4.
If the resistance is less than approximately 30
, the
audible signal will sound. If the circuit is open, the
display will indicate “1”.
DIODE TEST
1.
Insert the black test lead banana plug into the negative
COM
jack and the red test lead banana plug into the
positive diode jack.
2.
Turn the rotary switch to the
/
•)))
position
3.
Touch the test probes to the diode under test. Forward
voltage will indicate 400 to 700mV. Reverse voltage will
indicate “
I
”. Shorted devices will indicate near 0mV. Shorted
devices will indicate near 0mV and an open device will