Pyle PDMT08 PDMT08 Manual 1 - Page 2
Safety Instructions
 |
View all Pyle PDMT08 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
SAFETY INSTRUCTIONS This meter has been designed for safe use, but must be operated with caution. The rules listed below must be carefully followed for safe operation. 1. NEVER apply voltage or current to the meter that exceeds the specified maximum: Input Limits Function Maximum Input VAC 600V DC/AC V DC or V 600V DC/AC, 200Vrms on 200mV range AC mA DC 200mA 250V fast acting fuse A DC 10A 250V fast acting fuse (30 seconds max every 15 minutes) Resistance, Continuity 250Vrms for 15sec max 2. USE EXTREME CAUTION when working with high voltages. 3. DO NOT measure voltage if the voltage on the "COM" input jack exceeds 500V above earth ground. 4. NEVER connect the meter leads across a voltage source while 2
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
 |
 |
2
SAFETY INSTRUCTIONS
This meter has been designed for safe use, but must be operated
with caution. The rules listed below must be carefully followed for
safe operation.
1.
NEVER
apply voltage or current to the meter that exceeds the
specified maximum:
Input Limits
Function
Maximum Input
VAC
600V DC/AC
V DC or V
AC
600V DC/AC, 200Vrms on 200mV range
mA DC
200mA 250V fast acting fuse
A DC
10A 250V fast acting fuse
(30 seconds max every 15 minutes)
Resistance,
Continuity
250Vrms for 15sec max
2.
USE EXTREME CAUTION
when working with high voltages.
3.
DO NOT
measure voltage if the voltage on the "COM" input
jack exceeds 500V above earth ground.
4.
NEVER
connect the meter leads across a voltage source while