RCA RCU800MSL User Manual - Page 10

RCU800manual 3/8/00 2:03 PM Page 10 Programming For DVD Most RCA, GE and ProScan DVD systems will not require programming. Check to see if your DVD System responds to the remote before you begin programming. 1. Manually turn on the DVD System. Find the three digit code for your DVD System in the code list below. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the DVD button (The INDICATOR LIGHT will blink then remain lit). 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. 5. Aim the remote at your DVD System and press the ON•OFF button. Your DVD System should turn off. 6. If the DVD System responds, no further programming is required. Note: If your DVD does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 17. 7. Enter your code here for easy reference. CODE SEARCH INDICATOR LIGHT DVD (BLINK) 1 2 3 4 5 6 7 8 9 0 (OFF) ON OFF DVD CODE DVD Codes JVC 161 Magnavox 162 Mitsubishi 163 Philips 162 Pioneer 165 ProScan 160 Sony 166 RCA 160 Toshiba 167 9