RCA RCU800MSL User Manual - Page 19

RCU800manual 3/8/00 2:03 PM Page 19 Trouble Shooting PROBLEM Red light not blinking when you press any key SOLUTION A) Replace the batteries with 2 new AAA alkaline batteries. B) Check if batteries are properly installed. The remote does not operate your video devices A) Try all the codes listed for your brand. B) Try the Code Search method on page 17. Not performing commands properly Start Code Search over again to locate the proper code for full compatibility. Problems programming a TV/VCR Combo Unit Try the VCR code for your brand. Some combo units, however, may require both a TV and a VCR code for full operation. VCR not recording As a safety feature on your remote, you must press the REC button twice. Problems changing channels No response after pressing a key If your original remote required ENTER after a channel, press ENTER after you select a channel. A) Make sure you have new batteries and you are aiming your remote at your devices. B) Check that batteries are properly installed. See page 2. SELECT button not responding Try using the MENU or INFO button to make the selection while in the Program Guide. Flashing Indicator Light Invalid Code for the device. Check the Code list and reprogram the Remote Control. Note: Reprogramming may be required after batteries are removed. Help Line If you need additional set-up help, please call the Help Line at: 1-800-420-7968 18