RCA RCU800MSL User Manual - Page 18

RCU800manual 3/8/00 2:03 PM Page 18 Programming With Code Search If your TV, VCR, DBS Satellite System, Cable Box or Audio System does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following the steps below. 1. Manually turn on the device you wish to program. INDICATOR LIGHT 2. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH. 3. Press and release the device button for the device you are programming. The INDICATOR LIGHT will blink once, then remain lit. CODE SEARCH VCR1 ON OFF TV (BLINK) DVD VCR2 AUX DBS•SAT Note: For Aux programming (when not an audio code) press AUX followed by AUDIO CABLE the device button. Use DBS•SAT button for programming CABLE. 4. Press and release ON•OFF until your device turns off. Important: You may have to press ON¥OFF up to 200 times. ON OFF 5. When your device turns off, press ENTER, the INDICATOR LIGHT will turn off. ENTER (OFF) Identifying Codes From Your Universal Remote If you need to find the three-digit code for your TV, VCR, DBS System, Cable Box or Audio System after your device is set-up use this procedure. INDICATOR LIGHT 1. Press and hold CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH. CODE SEARCH 2. Press and release the device button for the code you are retrieving. The Indicator Light will blink once. Note: For AUX retrieving press AUX button followed by the device button. VCR1 ON OFF TV (BLINK) DVD VCR2 AUX DBS•SAT 3. Press and release CODE SEARCH. The INDICATOR LIGHT will turn off. 4. Starting with 0 on the keypad, press the number buttons in order (0-9) until the INDICATOR LIGHT blinks. AUDIO CABLE CODE SEARCH (OFF) 0...9 5. The number which causes the indicator light to blink is the first digit of your code. 6. Repeat step 4 until you have retrieved all three numbers in the code. 17