RCA RCU800MSL User Manual - Page 11

RCU800manual 3/8/00 2:03 PM Page 11 Programming For DBS System Most RCA, GE and ProScan Satellite systems will not require programming. Check to see if your DBS Satellite System responds to the remote before you begin programming. 1. Manually turn on DBS System. Find the three digit code for your DBS System in the code list below. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. 3. Press and release the DBS•SAT button (The INDICATOR LIGHT will blink then remain lit). 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. 5. Aim the remote at your DBS System and press the ON•OFF button. Your DBS System should turn off. Note: If your DBS System does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 17. 6. With your DBS System on, press CH+ (CHANNEL UP). If the satellite system responds, no further programming is required. 7. Enter your code here for easy reference. CODE SEARCH INDICATOR LIGHT DBS•SAT (BLINK) 1 2 3 4 5 6 7 8 9 0 (OFF) ON OFF CH + SATELLITE CODE Satellite Codes Alphastar 079 Echostar (Dish System 089 Echosphere (Dish Net 078 GE 071, 080, 081 Hitachi SYS I 084 Hitachi SYS II 083 Hughes 077, 090 Magnavox 085 JVC 082 Panasonic 075 Philips 085 Primestar 076 Proscan 071, 080, 081 RCA 071, 080, 081 Sony 072 Toshiba 073 Uniden 086 10