RCA RCU800MSL User Manual - Page 13

RCU800manual 3/8/00 2:03 PM Page 13 Programming For AUX Button You can assign any one of the following devices to the AUX button: Audio Components (CD Player, Amplifier, Receiver, Tape Deck), Laser Disc Player or a second TV, VCR, DBS Satellite System or Cable Box. 1. Manually turn on the device you wish to control. Find the three digit code for the device you wish to program in the code list. 2. Press and hold the CODE SEARCH button until the INDICATOR LIGHT lights, then release the CODE SEARCH button. Device Page TV 5-6 VCR 7-8 DVD 9 DBS System 10 Cable Box 11 Audio 14 INDICATOR LIGHT CODE SEARCH 3. Press and release the AUX button (The INDICATOR LIGHT will blink then remain lit). Then press the button for the device you want to program (TV, VCR, DBS¥SAT, DVD) (Press DBS¥SAT to add another Cable Box and press DVD for CD). AUX (BLINK) 4. Enter the code using the Number Buttons. After your code is entered, the INDICATOR LIGHT will turn off. If the code is not valid, the INDICATOR LIGHT will blink. Check the code list and repeat process. 5. Aim the remote at the device you wish to control and press the ON•OFF button. The device should turn off. 1 2 3 4 5 6 7 8 9 0 (OFF) ON OFF Note: If the device you have programmed does not respond, try all the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 17. 6. With your device on, press CH+ (Channel UP) or ON•OFF button. If the device responds, no further programming is required. CH + OR ON OFF 7. Enter your code and the type of device you programmed here for easy reference. AUX CODE TV VCR CABLE DBS CD RCVR LD DVD  12