RCA RCU900 User Guide - Page 17
Setup, Learn, Macro, Screen - learning remote
UPC - 079000322634
View all RCA RCU900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
RCU900_IB_revC.qxp 12/3/02 9:45 Page 17 Learn Commands Now you're ready to have your RCU900 learn the commands from your existing remotes. All Learned keys are saved automatically. Remember, only one original remote can be stored under any one mode. The RCU900 can learn the commands for one TV remote, one VCR remote, one DVD remote, etc. 1. Point the top of the original remote at the base of the RCU900 so the IR LED on the original remote is in line with the RCU900 Learning sensor, located at the bottom of the remote. The remotes should be positioned two to three inches apart. 2. Press and hold the SETUP key on the rubber keypad until the LED indicator light remains on and the touchscreen shows the Main Setup Screen. This process takes approximately 2-3 seconds. 3. Release the SETUP key. 4. Press and release the LCD LEARN key. The LED indicator light blinks once to indicate acceptance of the keypress. 5. The touchscreen now shows the Device Setup Screen. Press and release the device key on the rubber keypad that corresponds to the remote you want the RCU900 to learn (TV, VCR, SAT/CBL, etc.). The LED indicator light blinks once to indicate acceptance of the keypress. 6. The touchscreen now shows the Learn Setup Screen 1, which displays the current screen keys for the mode you have chosen. The LCD SETUP MACRO and LEARN keys are also shown. 7. Press and release the key on the RCU900 to be taught. (Remember: You can switch between the screens displayed by pressing the LCD SCREEN key.) The LED indicator light blinks once to indicate acceptance of each keypress. 8. Now, press and hold the key on the original remote until the LED indicator blinks once and the touchscreen shows Learn Setup Screen 2. This process takes 2-3 seconds to complete. 9. To learn another key, press and release the LCD LEARN key and repeat from Step 7. 10. If a problem occurs with the Learning process, the LED indicator light flashes for two seconds and you hear three beeps, but the unit remains in the Learn routine with Learn Setup Screen 1 displayed. Repeat from Step 6. 17