RCA RCU900 User Guide - Page 7

RCU900_IB_revC.qxp 12/3/02 9:45 Page 7 Code Entry In order for the RCU900 to control your devices (TV, VCR, DVD, etc.), you must program it with the library code for each device. This enables the RCU900 remote to control your device with the proper commands. If your TV, VCR, DVD, or satellite receiver is an RCA, ProScan or GE brand, the RCU900 may not need any programming to control them. To program the remote with the codes for your devices, you can use one of three methods: Library Code Entry, Code Search or Code Autosearch. Library Code Entry You can enter codes in your RCU900 from the Code List using the SETUP key on the rubber keypad. (See the Code List of the most popular brands on page 29.) When you enter a valid code for any given mode (e.g., when you enter a code for a TV), the Default Key Label Screen is used and any previously Learned functions for that mode are deleted. The mode is reset to its power-on default state. However, Macro settings remain unchanged and now include the new code just entered. 7