RCA RS2052 User Manual - RS2052 - Page 18

Limited Warranty U.S., Maintenance - service manual

Page 18 highlights

RS2052 EN 4/12/05 11:33 AM Page 36 Maintenance Disconnect the audio system from the power EN source before performing any maintenance. CD Lens Care When your CD lens gets dirty it can also cause the system to output poor sound quality. To clean the Cleaning lens you will need to purchase a CD lens cleaner Clean the exterior of the system using a soft dust cloth. which can maintain the output sound quality of your system. For instructions on cleaning the CD lens, refer to the ones accompanying the lens CD Player cleaner. CAUTION! This system operates with a laser. It Technical Specification must be opened by only a qualified technician. Power supply: 120V~60Hz Dimensions ( H x W x D inches): Handling CDs Unit size - 11 x 7.3 x 12 • Do not touch the signal surfaces. Hold CDs by the edges, or by one edge and the hole. • Do not affix labels or adhesive tapes to the Speaker - 11.5 x 7.8 x 8.6 CD player: Response curve (+/- 2dB): 60Hz to 5kHz Rating Plate: Look for it at the back of the set. label surfaces. • Do not scratch or damage the label. CDs rotate at high speeds inside the player. • Do not use damaged (cracked or warped) CDs Maximum size of Mass Storage Class device supported: 20 GB Supported SD card memory size: 32 / 64 / 128 / 256 / 512 / 1024 MB Cleaning CDs Supported MMC card memory size: 32 / 64 / 128 MB • Dirty CDs can cause poor sound quality. Always keep CDs clean by wiping them gently with a soft cloth from the inner edge toward the outer perimeter. • If a CD becomes dirty, wet a soft cloth in water, wring it out well, wipe the dirt away gently, and then remove any water drops with a dry cloth. • Do not use record cleaning sprays or antistatic agents on CDs. Also, never clean CDs with benzene, thinner, or other volatile solvents which may cause damage to disc surface Limited Warranty (U.S.) What your warranty covers: EN • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase for labor and parts • Warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first. What we will do: • Pay any Authorized RCA Audio Service Center the labor charges to repair your unit. • Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished replacement parts required to repair your unit. How you get service: • Take your unit to any Authorized RCA Audio Service Center. To identify your nearest Authorized RCA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900. • Show the Authorized Service Center Representative your evidence of purchase date or first rental. • Pick up your unit when repairs are completed. • Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be presented to obtain warranty service. For rental firms, proof of first rental is also required. What your warranty does not cover: • Customer instruction. (Your Owner's Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your dealer.) • Installation and related adjustments. • Signal reception problems not caused by your unit. • Damage from misuse or neglect. • Cleaning of audio heads. • Batteries. • A unit that has been modified or incorporated into other products or is used for institutional or other commercial purposes. • A unit purchased or serviced outside the U.S.A. • Acts of nature, such as but not limited to lightning damage. Product Registration: • Please complete and mail the Product Registration Card packed with your product. It will make it easier to contact you should it ever be necessary. The return of the card is not required for warranty coverage. 29 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

29
EN
30
EN
Limited Warranty (U.S.)
What your warranty covers:
Defects in materials or workmanship.
For how long after your purchase:
One year from date of purchase for labor and parts
Warranty period for rental units begins with the first rental or 45 days from date of shipment to the
rental firm, whichever comes first.
What we will do:
Pay any Authorized RCA Audio Service Center the labor charges to repair your unit.
Pay any Authorized RCA Audio Service Center for the new or, at our option, refurbished
replacement parts required to repair your unit.
How you get service:
Take your unit to any Authorized RCA Audio Service Center.
To identify your nearest Authorized
RCA Audio Service Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
Show the Authorized Service Center Representative your evidence of purchase date or first rental.
Pick up your unit when repairs are completed.
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product
is within the warranty period must be presented to obtain warranty service.
For rental firms, proof
of first rental is also required.
What your warranty does not cover:
Customer instruction.
(Your Owner’s Manual describes how to install, adjust, and operate your unit.
Any additional information should be obtained from your dealer.)
Installation and related adjustments.
Signal reception problems not caused by your unit.
Damage from misuse or neglect.
Cleaning of audio heads.
Batteries.
A unit that has been modified or incorporated into other products or is used for institutional or
other commercial purposes.
A unit purchased or serviced outside the U.S.A.
Acts of nature, such as but not limited to lightning damage.
Product Registration:
Please complete and mail the Product Registration Card packed with your product.
It will make it
easier to contact you should it ever be necessary.
The return of the card is not required for warranty
coverage.
Disconnect the audio system from the power
source before performing any maintenance.
Cleaning
Clean the exterior of the system using a soft dust
cloth.
CD Player
CAUTION! This system operates with a laser. It
must be opened by only a qualified technician.
Handling CDs
• Do not touch the signal surfaces. Hold CDs by
the edges, or by one edge and the hole.
Do not affix labels or adhesive tapes to the
label surfaces.
Do not scratch or damage the label.
CDs rotate at high speeds inside the player.
Do not use damaged (cracked or warped) CDs
Cleaning CDs
• Dirty CDs can cause poor sound quality. Always
keep CDs clean by wiping them gently with a
soft cloth from the inner edge toward the
outer perimeter.
• If a CD becomes dirty, wet a soft cloth
in water,
wring it out well, wipe the dirt away gently,
and then remove any water drops with a dry
cloth.
• Do not use record cleaning sprays or antistatic
agents on CDs. Also, never clean CDs with
benzene, thinner, or other volatile solvents
which may cause damage to disc surface
CD Lens Care
When your CD lens gets dirty it can also cause the
system to output poor sound quality. To clean the
lens you will need to purchase a CD lens cleaner
which can maintain the output sound quality of
your system. For instructions on cleaning the CD
lens, refer to the ones accompanying the lens
cleaner.
Technical Specification
Power supply: 120V~60Hz
Dimensions ( H x W x D inches):
Unit size - 11
x 7.3 x 12
Speaker
- 11.5 x 7.8 x 8.6
CD player: Response curve (+/- 2dB): 60Hz to 5kHz
Rating Plate: Look for it at the back of the set.
Maximum size of Mass Storage Class device
supported: 20 GB
Supported SD card memory size: 32 / 64 / 128 /
256 / 512 / 1024 MB
Supported MMC card memory size: 32 / 64 / 128
MB
Maintenance
RS2052 EN
4/12/05
11:33 AM
Page 36