Reebok 8100 Es Treadmill English Manual - Page 7

2. Insert an Extension Leg (97) into the Base (85) as shown; if necessary, use a rubber mallet to fully insert the Extension Leg. Next, hold two Extension Leg Nuts (10) in the bottom of the Extension Leg, and tighten two 5/16" x 2" Bolts (2) with two 5/16" Star Washers (9) into the top of the Extension Leg. 2 2 85 9 10 97 3. Hold the Right Upright (113) near the Base (85). Insert the Upright Wire Harness (73) into the bot- 3 tom of the Right Upright and out of the top. 73 Attach the Right Upright (113) to the Base (85) with a 3/8" x 1" Bolt (4), a 3/8" x 2 3/4" Bolt (5), and two 3/8" Star Washers (8). Make sure that the Upright Wire Harness (73) is not pinched. Start both Bolts before tightening either of them. 113 85 73 8 5 4 8 4. Slide the Right Base Leg Cover (83) over the 4 end of the Right Upright (113). Attach the Right Base Leg Cover with two #8 x 2 1/4" Screws (7) and three #8 x 3/4" Screws (6). Be careful not to overtighten the Screws. 7 113 83 6 7