Reebok 8100 Es Treadmill English Manual - Page 8

Attach the Left Upright 111 to the Base 85

Get Reebok 8100 Es Treadmill PDF manuals and user guides View all Reebok 8100 Es Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the 5 85 Frame (55) so that the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled. 81 Attach two Base Pads (81) to the Base (85) with 1 two #8 x 1" Tek Screws (1). 1 81 55 6. Insert an Extension Leg (97) into the Base (85) as shown; if necessary, use a rubber mallet to 6 fully insert the Extension Leg. Next, hold two Extension Leg Nuts (10) in the bottom of the Extension Leg, and tighten two 5/16" x 2" Bolts (2) with two 5/16" Star Washers (9) into the top of the Extension Leg. 85 9 2 10 97 7. Attach the Left Upright (111) to the Base (85) with a 3/8" x 1" Bolt (4), a 3/8" x 2 3/4" Bolt (5), 7 and two 3/8" Star Washers (8). Start both Bolts before tightening either of them. 111 85 8 5 48 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
8
5. With the help of a second person, carefully tip
the treadmill onto its right side. Partially fold the
Frame (55) so that the treadmill is more stable.
Do not fully fold the Frame until the treadmill
is completely assembled.
Attach two Base Pads (81) to the Base (85) with
two #8 x 1" Tek Screws (1).
1
85
55
1
81
5
6. Insert an Extension Leg (97) into the Base (85)
as shown; if necessary, use a rubber mallet to
fully insert the Extension Leg. Next, hold two
Extension Leg Nuts (10) in the bottom of the
Extension Leg, and tighten two 5/16" x 2" Bolts
(2) with two 5/16" Star Washers (9) into the top
of the Extension Leg.
2
97
9
85
6
7. Attach the Left Upright (111) to the Base (85)
with a 3/8" x 1" Bolt (4), a 3/8" x 2 3/4" Bolt (5),
and two 3/8" Star Washers (8).
Start both Bolts
before tightening either of them.
4
5
111
85
7
8
8
10
81